How to Clean a Green Swimming Pool Fast

very once and while, your pool will get away from you and turn into a total swamp filled with green algae. Maybe you had a bad storm. Maybe you went on vacation. No matter how it happened, we'll show you how you can have your pool looking back to new in no time.

At a Glance

6

Steps

1

hour(s)

Easy

Difficulty

Step-by-Step

Step

1

Skim

Using your skimmer net, remove as much large floating debris and “algae patties” from the pool as possible.

Step

2

Vacuum

Set your system to “vacuum to waste” and using your pool vacuum remove as much large debris and sludge from the bottom of the pool as possible.

Step

3

Add Swamp Treat™

Add one (1) bottle of Swamp Treat™ per 20,000 gallons of pool water.

Step

4

Brush

Brush the walls of the pool. One good brush over the wall should be fine.

Step

5

Shock

Add approximately 2 pounds/gallons of chlorine pool shock per 10,000 gallons – cascading it around the pool.

Step

6

Run the Filter

Set your system back to filter, and turn the pump on. Allow to filter for 24 hours. Continue to filter and backwash as necessary until pool clears up.

What You’ll Need

Brush attachment
Vacuum attachment
Swamp Treat Algicide
Pool Shock

Extra Tips

You’ll likely not be able to see the bottom of the pool. In that case, you’ll need to do it by feel. Try to go over the bottom of the pool at least once, concentrating on areas that feel like they have more growth.
Round your pool up to the nearest 5,000 gallons for dosing.
Check the filter pressure every few hours and backwash as necessary. Your filter may clog quickly depending on how much algae you have.
Backwash your filter when the filter pressure rises above 10 psi than normal.
Don’t pour shock directly on colored surfaces. This can discolor your surface.

Still need help?

Still have questions? Need an expert’s advice? Visit our support center for additional documentation and to open a ticket with a Pool Technician.

Visit the Support Center

Explore More Pool How-To’s

How to Remove Iron Stains from Swimming Pools

Iron is the most common type of metal/mineral staining in pools. So odds are good you’ll run into brown rust stains in your pool. In this how-to, we show you how you can remove them fast as well as how to prevent them in the future.

How to Treat White Water Mold in Swimming Pools

Does your pool look like it was filled with shredded tissue paper? Then your pool has “white water mold”. Despite the name, this is actually a type of algae that is closely related to mustard algae. In this article we show you how to get rid of it fast so you can go back to swimming.

How to Acid Wash a Swimming Pool Without Draining

Over time pools develop stains. At a certain point you may consider acid washing your pool to freshen up your surface. Traditional acid washing is difficult, expensive, and can damage the surface of the pool. Here we give you a step-by-step guide on how to acid wash your pool without draining.

« Older Entries

Next Entries »