How to Close a Pool for Winter

If you live an area where the weather gets cold during the winter, then you'll need to close your pool. Here we give you a step-by-step guide on how to do it right. And make sure your pool opening will be a breeze in the spring.

At a Glance

10

Steps

1
hour(s)
Medium

Difficulty

Step-by-Step

Step
1

Balance

The first step in the closing your pool is to make sure your water chemistry is balanced. You should make sure that your pH, Hardness, and Total Alkalinity are all balanced to protect the surface of the pool from staining and etching.

Step
2

Run Filter for 24 hours

Run filter for 24 hours to remove all debris present in the water.

Step
3

Remove Debris

Remove all debris from the pool. If necessary, vacuum the floor, and use a skimmer or leaf net to remove floating items. Clean the surface of the walls and floor with a stiff-bristle brush to ensure that no residue or dirt is present.

Step
4

Remove Fittings

Remove all of the pool’s fittings, such as wall fittings, solar blankets, skimmer baskets, cleaners and lights. Pool accessories should be removed as well, including the ladder and diving board. Store all of these items inside for the winter to protect them from the elements.

Step
5

Lower Water Level

Using the filter pump and setting the inlet to pull from the main drain, lower the pool’s water level to approximately 2 inches below the lowest return line. If your pool is lined with tile along the edge, make sure the water line falls below the bottom of the tile. In a vinyl-lined pool, it is not necessary to lower the water.

Step
6

Drain Pump and Filter

Drain all pumping, filtering, heating, and sanitizing equipment to prevent any damage from freezing. If any water is left inside these items, they may freeze and crack when the temperature drops. A small pump and filter may be stored indoors for the winter. Otherwise, use a compressor or shop vacuum to make sure that all the water is blown out of the equipment.

Step
7

Blow out lines (Inground Pools)

In an in-ground pool, the plumbing lines must also be blown out for the winter. Use a vacuum blower for the job, and finish by placing expansion plugs on the lines. If you do not want to blow out the plumbing, add an antifreeze product to the line. With an above-ground pool, simply detach the hoses that connect to the filter and pump, and add plugs to the outlets.

Step
8

Lube

Lubricate O-rings, plugs, and valves; this will make it easier to open the pool in the spring.

Step
9

Winterizing chemical

Add a preventative algicide (12 oz. of No Mor Problems® per 20,000 gallons) to prevent algae blooms and bacteria, and add a stain inhibitor/chelator (2 pounds of Pool Stain Treat® per 20,000 gallons) to prevent staining during winter. Make sure to perform one last shock treatment.

Step
10

Cover

The final step in the winterizing process is to install your pool’s cover. Make sure it fits correctly and inspect it for holes or damage in the surface material where debris may enter. For an in-ground cover, use some type of water bags to secure the cover in place. An above-ground pool cover is usually secured with cables.

What You’ll Need

  • No Mor Problems® Preventative Algicide
  • Pool Stain Treat® Stain Preventer
  • Pool Shock of your choice
  • Net attachment
  • Brush attachment
  • Vacuum attachment
  • Lubricant

Extra Tips

  • We recommend you balance according to the Hamilton Index™
  • Most equipment is fitted with drain plugs to allow for easy drainage.
  • Run the filter for 24 hours to get everything out of the water
  • Remove debris to prevent stains from forming over winter.
  • Drain all water from equipment and lines to prevent any damage
  • Add preventatives to protect against algae and stains over the winter

Still need help?

Still have questions? Need an expert’s advice? Visit our support center for additional documentation and to open a ticket with a Pool Technician.

Explore More Pool How-To’s

How to get rid of Mustard Algae in Swimming Pools

How to get rid of Mustard Algae in Swimming Pools

From Florida to California and everthing in between; Mustard Algae is the most common form of swimming pool algae. Odds are if you’ve owned a swimming pool, you’ve ran into this yellowish sandy looking algae growing in the shady areas of your pool. Here we give you step by step directions on how to get rid of mustard algae.

How to Clean a Green Swimming Pool Fast

How to Clean a Green Swimming Pool Fast

very once and while, your pool will get away from you and turn into a total swamp filled with green algae. Maybe you had a bad storm. Maybe you went on vacation. No matter how it happened, we’ll show you how you can have your pool looking back to new in no time.