It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Always add No Mor Problems® directly to pool or spa water. No Mor Problems® is for the maintenance of clear algae free swimming pool and spa water. If a rescue treatment is needed to control an algae bloom, use Yellow Treat®, Swamp Treat™, Pink Treat® or Green Treat® according to the directions for use. This product is not for use in outdoor pools. Outdoor hot tubs and spas must be covered when not in use.
Discharge Directions for Commercial and Residential Pool, Spa, and Hot Tub Uses: Before draining a treated pool, spa, or hot tub, contact your local sanitary sewer and storm drain authorities and follow their discharge instructions. Do not discharge treated pool, spa, or hot tub water to any location that flows to a gutter, storm drain or natural water body unless discharge is allowed by state and local authorities.
TO PREVENT THE START OR RETURN OF YELLOW, MUSTARD, PINK, BLACK AND GREEN ALGAE, PINK AND WHITE SLIME, AND PINK AND WHITE WATER MOLD, AND TO PROVIDE YEAR-ROUND CRYSTAL CLEAR WATER IN SWIMMING POOLS AND SPAS TREATED WITH CHLORINATING OR BROMINATING PRODUCTS.
INITIAL TREATMENT: Make initial treatment with No Mor Problems® when starting preventative treatment.
For Swimming Pools: For each 5000 gallons pool water, add 3 fluid ounces of No Mor Problems® DIRECTLY to the pool water. For each 5000 gallons pool water, add chlorinating product directly to the pool water. Use the recommended dosage rate for chlorination from the label of an EPA-registered chlorine product. DO NOT DIRECTLY MIX No Mor Problems® WITH THE CHLORINATING PRODUCTS. Before swimming, use test kit for measuring chlorine levels, as directed on your chlorinating product label. Do not enter or swim until the chlorine residual drops to 3 ppm.
MAINTENANCE TREATMENTS WITH NO MOR PROBLEMS®: Use No Mor Problems® when adding chlorinating or brominating products directly to the pool water for pool maintenance. Use the recommended dosage rate from the label of an EPA-registered chlorine or bromine product. Add 5 to 6 fluid ounces of No Mor Problems® per pound (dry) or gallon (liquid) of chlorinating product added. When using Lithium Hypochlorite as a source of chlorine, add 3 fluid ounces of No Mor Problems® per pound of Lithium Hypochlorite. When using chlorine produced by a chlorine generator, use 6 fluid ounces of No Mor Problems® per pound (dry) or gallon (liquid) of chlorinating product. When adding bromine for pool maintenance, add 5 fluid ounces of No Mor Problems® per pound of brominating product. Before swimming, use test kit for measuring chlorine levels, as directed on the chlorinating product label. Do not enter water or swim until the chlorine residual drops to 3 ppm.