Poly60 Treat

This product is used to control the growth of algae in
swimming pools.For maximum effectiveness of this product in
swimming pools, heated swimming pools, exterior whirlpools,
and hot baths, those with heavy growths of algae must be
cleaned prior to using this product.

• For pools having just visible algae growth, add an initial dose of
  11-17 fluid ounces of this product per 10,000 gallons of water
  and remove settled algae debris by cleaning.
• For treatment of a freshly cleaned and filled pool, add initially
  6-11 fluid ounces of this product per 10,000 gallons of water.
  To maintain pools free of visible algae growth, subsequent
  additions of 2- 4 fluid ounces of this product per 10,000
  gallons of water should be made every 5-7 days after the initial
  treatment.
• Uniform distribution of this product throughout the pool water

is necessary for maximum effectiveness.

• This product is compatible with those chemicals normally used
  to treat pools and is effective at both acid and alkaline pH. This
  product can be used in pools treated with chlorine chemicals
  and may reduce the amount of those chemicals normally
  required. However, do not mix this product with concentrated
  dry or liquid chlorine products.

Before draining a treated pool, contact your local sanitary
sewer and storm drain authorities and follow their discharge
instructions. Do not discharge treated pool water to any
location that flows to a gutter or storm drain or natural water
body unless discharge is allowed by state and local authorities.