Swamp Treat

It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Always add Swamp TreatTM directly to pool or spa.

WAIT 8 HOURS BEFORE SWIMMING AFTER INITIAL TREATMENT

Step 1 : Remove as much debris as possible from the pool with a skimmer or leaf net.

Step 2: Add one bottle of Swamp TreatTM per 20,000 gallons of water. Broadcast Swamp TreatTM directly on surface of water.

Step 3: Brush entire surface of pool.

Step 4: Independent of chlorine reading, immediately add liquid or dry chlorinating product for super-chlorination. Use the dosage rate for super-chlorination from the directions of an EPA registered chlorinating product.

Step 5: Before swimming, use a test kit as directed on your chlorine product label. Do not enter swimming pool or swim until chlorine residual drops to 3 ppm.

Step 6: Chlorinate continuously with tablets or chemical feeder. Add slow dissolving tablets (such as trichloro-s-triazinetrione) during summer and heavy swimming conditions.

Step 7: To prevent the reoccurrence of algae and to maintain crystal clear water, No Mor Problems may be used in conjunction with chlorinating and brominating products. Follow Directions for Use for No Mor Problems and maintain the chlorine or bromine level on the chlorinating or brominating product label.
This product is not for use in outdoor pools. Outdoor hot tubs and spas must be covered when not in use.

Discharge Directions for Commercial and Residential Pool, Spa, and Hot Tub Uses:

Before draining a treated pool, spa, or hot tub, contact your local sanitary sewer and storm drain authorities and follow their discharge instructions. Do not discharge treated pool, spa, or hot tub water to any location that flows to a gutter, storm drain or natural water body unless discharge is allowed by state and local authorities.